operating _2502 OPERATINGreversing the door (optional)REVERSING THE DOOR(OPTIONAL)Before you reverse the refrigerator door, makesure to unplug the refrigerator. Samsungrecommends that reversing of the door openingis only completed by Samsung approved Serviceproviders. This will be on a chargeable basis and atthe customers expense.Any damage caused while attempting toreverse the door opening is not coveredunder the appliance manufactureswarranty.Any repairs requested due to thiscircumstance will be completed ona chargeable basis at the customersexpense.1. Before attempting to reverse the refrigeratordoors ensure that the refrigerator isdisconnected from the main electricity supplyand all food stuffs are emptied from inside theappliance.2. If the customer does not feel confident to followinstruction in the user manual, a Samsungqualifi ed service engineer must be contacted tocarry out this change.3. Do not plug in Refrigerator just after doorreverse fi nished process and wait for at leastone hour.Required ToolsNot providedPhillips HeadDriver (+)Flat Head Driver(-)11 mm Wrench(for hinge shaft)Not provided Additional part8 mm SocketWrench(for bolts)Hinge Cover / Cap Space DoorDisassembly of the refrigerator door1. Remove the Cover Wire Door.Cover Wire DoorCover Wire Door* RB37* model only* RB37* model onlyCover Wire DoorCover Wire Door2. Disassemble the Cap space Door.Cap space DoorCap space Door* RB37* model only* RB37* model onlyCap space DoorCap space Door3. Remove the Cover Hinge to push a hook likebelow Pictures.• Insert a fl at-head screwdriver and put it back asshown in Figure #1.• As shown in Figure #2, Lever up the cover andpush a hook as shown in Figure #3.(Take care not to damage the CoverHinge Wireby pushing it too hard)• Disassemble it by pushing the A in Figure #4 byhand as Figure #5.DA68-02833Q-12.indb 25DA68-02833Q-12.indb 25 2014. 12. 6. 10:152014. 12. 6. 10:15