Samsung RB29F Series User Manual

Also see for RB29F Series: User manual User manual User manual User manual User manual

Contents

Samsung RB29F Series User Manual Manual pdf 10 page image

setting up _1918_ setting up01 SETTINg up1. Remove the Cover Wire ( 1 ) and Cap door L( 2 ).2. Remove the Cover Hinge to push a hook likebelow Pictures.3. Disconnect the housing.And then remove 2 screws on the Upper Hingeand Upper Hinge.The door is heavy, be careful not to injureyourself when removing the door.cAutIoN4. Remove the fridge door from the Middle hingeby carefully lifting the door straight up.The door is heavy, be careful not to injureyourself when removing the door.5. Disassemble the Middle hinge.6. Remove the freezer door from the Bottomhinge by carefully lifting the door straight up.The door is heavy, be careful not to injureyourself when removing the door.cAutIoNcAutIoNSETTINg up THE REFRIgERATORNow that you have your new refrigerator installedand in place, you are ready to set up and enjoy thefull features and functions of the appliance.By completing the following steps, your refrigeratorshould be fully operational.If not, first check the power supply and electricitysource or try the troubleshooting section at theback of this user guide.If you have any further questions, contact yourSamsung Electronics service center.1. Place the refrigerator in an appropriate locationwith reasonable clearance between the walland the refrigerator.Refer to installation instructions in this manual.2. Once the refrigerator is plugged in, make surethe interior light comes on when you open thedoors.3. Set the temperature control to the coldesttemperature and wait for an hour.The freezer should get slightly chilled and themotor should run smoothly.4. After powering the refrigerator, it will take a fewhours to reach the appropriate temperature.Once the refrigerator temperature is sufficientlycool, you can store food and drink in therefrigerator.After powering the refrigerator, the alarmwill sound. Press Freezer or Fridge button.(Only for Coolselect zone funtion model )Refer to on page 23 “Using the controlPanel”.REvERSINg THE dOOR(OpTIONAL)Before you reverse the refrigerator door, makesure to unplug the refrigerator. Samsungrecommends that reversing of the door openingis only completed by Samsung approved Serviceproviders. This will be on a chargeable basis and atthe customers expense.Any damage caused while attempting toreverse the door opening is not coveredunder the appliance manufactureswarranty.Any repairs requested due to thiscircumstance will be completed ona chargeable basis at the customersexpense.1. Before attempting to reverse the refrigeratordoors ensure that the refrigerator isdisconnected from the main electricity supplyand all food stuffs are emptied from inside theappliance.2. If the customer does not feel confident to followinstruction in the user manual, a Samsungqualified service engineer must be contacted tocarry out this change.3. Do not plug in Refrigerator just after doorreverse finished process and wait for at leastone hour.Required ToolsNot providedPhillips HeadDriver (+)Flat Head Driver(-)11 mm Wrench(for hinge shaft)Not provided Additional part8 mm SocketWrench(for bolts)Hinge Cover / Cap Space Door( 2 )( 1 )