operating14_CHANGING THE WATER FILTERTo reduce risk of water damage to yourproperty DO NOT use generic brandsof water filters in your SAMSUNGRefrigerator.USE ONLY SAMSUNG BRAND WATER FILTERS.SAMSUNG will not be legally responsible for anydamage, including, but not limited to propertydamage caused by water leakage from the use of ageneric water filter. SAMSUNG Refrigerators aredesigned to work ONLY WITH SAMSUNG WaterFilter.The Filter light turns red to let youknow when it is time to change yourwater filter cartridge.To give you time to get a new filter,the red light comes on just before thecapacity of the current filter runs out.Changing the filter on time provides you with thefreshest, cleanest water from your refrigerator.1.filter ( 1 ) about 1/4 turn, counter-clockwise.Pull the water filter (2. 1 ) from the case filter ( 2 ).To change the water filter more easily,ttfilter because impurities in the water cause itto stick. If you are having difficulties, grip thewater filter firmly and pull it hard.t When you pull thewater filter, a littleSometimes it is hard to disassemble the waterwater can leak fromthe opening. This isnormal. To minimizethe water leaks, keepthe filter cartridge horizontal when you pull it.yartretlfiretawehtytpme,woflrevotneverpoTt( 3 ) and dry around the filter case ( 2 ).Insert the new filter into the filter case ( 43. ).Push the filter, and then turn it clockwise until it4.locks.tfilter because of high water pressure,The locked symbol should be lined upIf you have trouble inserting the watertwith the indicator line.After removing the old5.water filter and installinga new reset the indicatorby pressing the “Fridge”and “Power Cool” buttonsimultaneously for about 3seconds.6.on.For a replacement water filter, you canvisit your local home Improvement centeror contact the Samsung Parts distributor.Be sure the replacement water filter hasthe SAMSUNG logo on the box andon the water filter. Link : http://www.samsungparts.comRemoving any residual matter insidethe water supply line after installingthe water filter.Turn ON the main water1.supply and supply waterto the refrigerator.Run 1 Gal of water throughthe2.dispenser until thewater runs clear (approx.6 to 7 minutes). This willclean the water supply system and remove airfrom the lines.If after pour 1 Gal the water doesn’t turn clear is3.Open the Refrigerator door and make sure4.there are no water leaks coming from thewater filter.Be sure to flush the dispenser system thoroughly,otherwise water may drip fr om thedispenser.This means that there is still air in the line.WARNING(Red)21324