Samsung RF265ABBPXAA User Manual

Also see for RF265AB: User manual User manual Quick start guide User manual Specifications

Samsung RF265ABBPXAA User Manual Manual pdf 21 page image

Operating _1using tHE CoLD wAtER DisPEnsERContRoLLing tHE tEMPERAtuRE02 oPERAtingusing the water dispenser (RF266AB)Place a glass underneath the water outlet and push gentlyagainst the water dispenser lever with your glass. Make surethe glass is in line with the dispenser to prevent the water fromsplashing out.If you have just installed the Refrigerator or just installed a newwater filter, pour out the first six glassfuls of water to flush outimpurities in the water supply system. Make sure water flowscleanly before drinking.Controlling the Freezer temperatureThe Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press theFreezer button repeatedly until the desired temperature is shown in the temperature display. Keep inmind that foods like ice cream may melt at 4°F.The temperature display will move sequentially from -14°F to 8°F. When the display reaches 8°F, it willbegin again at -14°F.Five seconds after the new temperature is set, the display will again show the actual current freezertemperature until the new temperature is reached.Controlling the Refrigerator temperatureThe Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Pressthe Fridge button repeatedly until the desired temperature is shown in the temperature display.The temperature control process for the Fridge works just like the Freezer process.Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will beginadjusting towards the newly set temperature. This will be reflected in the digital display.The temperature of the Freezer or the Refrigerator may rise from opening the doors too frequently, or if alarge amount of warm or hot food is placed in either side.This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to theirnormal set temperatures, the blinking will stop.If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait foraround 10 minutes and then plug the power cord back in.If you have a long vacation or business trip, close the watervalve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages.The water tank’s capacity is approximately one third (1/3) of a gallon.Please wait 1 second before removing the cup after dispensing water to prevent spills.CAutionPUSH/NE4OUCH0URE7ATER