0_ OperatingCHAnging tHE wAtER FiLtERThe “Filter Indicator” light lets you know when it is time to change your water filter cartridge. Togive you preparation time to get a new filter, the red light will come on just before the capacityof the current filter runs out. Changing the filter on time provides you with the freshest, cleanestwater from your fridge.1. Take a new water filter and put a month indicator sticker on the filter as shown.The date on the sticker must be six months from the current date. For example, if you are replacingthe water filter in March, put the “SEP” (September) sticker on the filter to remind you to replace inSeptember. Normal filter life is about every 6 months.2. Remove the new filter’s protective cap and remove the old filter.3. Position and insert the new filter into the filter housing.Slowly turn the water filter clockwise to align with the printing mark on the cover, locking the filter inposition. Make sure to align the water filter label mark with the center of cover filter printing as illustrated.Remember, do not over-tighten.4. Once you have completed this process, hold the Fridge + Power Cool button simultaneously for 3seconds to reset the filter schedule.ordering replacement water FilterFor replacement waster filter you can visit your local service center or contact the Samsung Parts distributor.Be sure the replacement water filter has the SAMSUNG logo on the box and the water filter.Link : http://www.samsungparts.com5. Lastly, run about six glassfuls of water through water dispenser to clean the water supply system.Make sure that water flows clearly again before drinking.Be sure to flush the dispenser thoroughly or water may drip from the dispenser.This is due to the fact that there is still air in the line.Do NOT use the water or ice dispenser without a water filter cartridge because the water line maybecome blocked.Turn until thelabel aligned.Cover filter1 Sticker(monthindicator)Operating your SAMSUNG FrenchDoor Refrigerator