Operating _2302 oPERAtinGEnergy saverThis icon will light up when you activate the “Energy Saver” function. The Energy Saver function is automatically set to“ON” when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off.LightingThis icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under thedisplay) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,turn the “Lighting” feature off.AlarmThis icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open formore than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.ice offThis icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.LockThis icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use the control panel.If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the controlpanel again.usinG tHE ContRoL PAnELBasic temperature of Freezer and Refrigerator CompartmentsThe basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -19°Cand 3°C respectively.If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.Controlling the Freezer temperatureThe Freezer temperature can be set between -14ºC and -25ºC to suit your particular needs. Press the Freezerbutton repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foodslike ice cream may melt at 15ºC. The temperature display will move sequentially from -25ºC to -14ºC. When thedisplay reaches -14ºC, it will begin again at -25ºC.Five seconds after the new temperature is set, the display will again show the actual current freezer temperatureuntil the new temperature is reached.Controlling the Refrigerator temperatureThe Refrigerator temperature can be set between 7ºC and 1ºC to suit your particular needs. Press the Fridgebutton repeatedly until the desired temperature is shown in the temperature display.The temperature control process for the Fridge works just like the Freezer process.Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjustingtowards the newly set temperature. This will be reflected in the digital display.- The temperature of the Freezer, Refrigerator or Pantry Room may rise when you open the doors too frequently,or if a large amount of warm or hot food is placed inside.- This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normalset temperatures, the blinking will stop.- If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around10 minutes and then plug the power cord back in.- The temperature of the Pantry Room may be a little different according to the location inside.- If communication between Display and Main Controller errors, Pantry Display light may blink.Once the communication return to their normal set temperatures, the blinking will stop.If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.