Setting Up _1701 sEttinG uPADJustinG tHE FREEzER DRAwER LEVEL1. Locate the height-adjuster ( 1 ) in the freezer drawer.Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.2. Loosen the controller screw( 3 ) with a Phillips screwdriver.3. Find the best level to align the door slope.After adjustment, first tighten screw( 3 ) and then screw( 2 ) .Freezer DrawerAdjustment partExample) The slope is about 2mm (0.08inch) as shown below.- Rotate the Height Adjuster to -2.0 to reduce the door slope.SlopeReferenceplane1 23
