Samsung RJ040F2HXEB Installation Manual

Also see for RJ040F2HX Series: Installation manual

Contents

4Deciding on Where to Install the Air ConditionerGeneralWhen deciding on the location of the air conditioner with the owner, the following restrictions must betaken into account.Do NOT install the air conditioner in a location where it will come into contact with the following elements:◆ Combustible gases◆ Saline air◆ Machine oil◆ Sulphide gas◆ Special environmental conditions◆ The air conditioner should be used only for the applications for which it has been designed : the indoor unit is notsuit able to be installed in areas used for laundry. If you must install the unit in such conditions, first consult your dealer.◆ The outdoor unit must NEVER be placed on its side or upside down, as the compressor lubrication oil will run into the coolingcircuit and seriously damage the unit.◆ Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds.◆ Do not block any passageways or thoroughfares.◆ Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any neighbours.◆ Choose a position that enables the piping and cables to be easily connected to the indoor unit and the recommendedlength will be respected.◆ Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessarynoise and vibration.◆ Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of the unit.◆ Maintain sufficient clearance around the outdoor unit, as indicated in the diagram on the page opposite.◆ Make sure that the water dripping from the drain hose runs away correctly and safely.◆ You have just purchased a Free Joint Multi air conditioner and it has been installed by your installation specialist.◆ This device must be installed according to the national electrical rules.◆ Max input power & current is measured according to IEC standard and input power & current is measured according toISO standard.◆ More than 2 indoor units should be installed when you use Free Joint Multi air conditioner.◆ Our units must be installed in compliance with the spaces indicated in the installation manual to ensure eitheraccessibility from both sides or ability to perform routine maintenance and repairs.The units’ components must be accessible and that can be disassembled in conditions of complete safety either forpeople or things. For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary toreach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any othermeans of elevation won’t be considered in-warranty and charged to end user.◆ With an outdoor unit having net weight upper then 60kg,we suggest do not install it suspended on wall, but consideringfloor standing one.CAUTIONOutdoor Unit