Unscrew the cover with head screwdriver.15REPLACING THE INTERIOR LIGHTAlways unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger ofelectric shock.+• Check that the power plug is correctly connected.• Is the temperature control on the front panel correctly set?• Does sun shine on the appliance or are there heat sources nearby?• Is the back of the appliance too near to the wall?The appliance is not operating at all or the temperature is too high• Is the temperature control on the front panel set to the coldest temperature?• Is the surrounding temperature too low?• Did you put food with a high water content in the refrigerator?The food in the refrigerator is frozen• Check that the appliance is installed on a stable, level floor.• Is the back of the appliance too near to the wall?• Have any foreign objects fallen behind or under the appliance?• Is the noise coming from the compressor in the appliance?• A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the variousaccessories contract or expand.There are unusual noises• Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming.When the surrounding temperature rises, this may not always be effective. However, this is not abnormal.• In very humid weather, condensation may form on the outer surface of the appliance when the moisturein the air comes into contact with the cool surface of the appliance.The front corners and sides of the appliance are warm and condensation starts to formPROBLEMS AND SOLUTIONS- Fluorescent light• Remove the interior light by pulling it downward, then replace it witha new one.- Incandescent light• Turn the interior light to pull it out and replace it with a new one.Screw the cover with head screwdriver.+