211. Disconnect the power cord of the refrigerator.2. Remove the fixed screws (6) of compressorcover.3. Slide up and take off the compressor cover tosee the machine compartment.4. Press the tab in electric box cover to take outby using a flat-blade screw driver.When the solenoids receive a signal from the micro-processor, they supply water to the water dispenseror the ice maker.1. Remove bracket screw (1) on electric box.2. Take the solenoids assembly out.3. Disconnect water tubes (3).The condenser Fan is located in the middle ofmachine compartment. It cools down the sub-condenser and the compressor.1. Disconnect the condenser fan wire.2. Remove screw (1) on the drain water tray.3. Take the condenser fan assembly off.The sub-condenser is located in the machinecompartment. The heat is extracted by condenserfan.1. Desolder the compressor discharge &the sub-condenser outlet.2. Take out the sub-condenser.Machine Compartment && Electric BoxMMeecchhaanniiccaall DDiissaasssseemmbbllyy7-3) Machine Compartment Disassembly(+)driver(-)driverPCB-MAIN ASSYWater SolenoidsCondenser FanSub-condenserDesoldering Point