Samsung RS21HB User Manual

Samsung RS21HB User Manual Manual pdf 20 page image

20_ setting upinstaLLing tHE watEr DisPEnsEr LinEFor Exterior modelParts for water line InstallationConnecting to the water supply lineConnect the water pipe with coupler and tap.1. Close the main water tap.2. Connect coupler “A” to the tap.CAUTIONThe water line must be connected to the coldwater pipe. If it is connected to the hot waterpipe, it may cause the purifier to malfunction.Water line fixer andscrews pipeconnector Water linepurifierpurifier lock-clipWARRANTY INFORMATIONThis water line installation is not covered by therefrigerator or ice maker manufacturer’s warranty.Follow these instructions carefully to minimise the risk ofexpensive water damage.Note:If the coupler does not fit on the current tap, gothe nearest authorised service dealer and purchase theright couplers fittings.COUPLER “A”TAPCOUPLERSIDE OFPURIFIERWATER INLETSIDE OF PURIFIERLINE OUTLET90 degreePURIFIER WATERselect the location where the purifier isto install. (Model with the purifier)- If you wish to reassemble the water inletand outlet sides of the purifier during purifierinstallation, see the reference illustration.- Cut the water line attached to the purifier to theappropriate place after measuring the distancebetween the purifier and the cold water tap.Replacement Instructions1. Shut off water supply.2. Note the Flow direction on the filter.3. Insert water supply tube into the inlet side of the filter until the tube stop.4. After inserting tube, put together the clip strongly. The Clip fix the tube.5. Turn on the water and check for leaks. If leaks occur, repeat step 1,2,3,4. If leaks persist,discontinue use and call your supporting dealer.6. Flush filter for 5 minutes before use.WATER SUPPLYINLET SIDE PERMEATFLOW DIRECTIONNote : You must also ensure that the cut is square and not atany sort of angle as this could cause a leakCAUTIONLocking ClipInsert Locking Clip Aftertube seated