27INSTALLATION INSTRUCTIONSINSTALLATION OF THE WATER DISPENSER LINESEPARATIONOF RED CAPSTICKER(MONTH INDICATION)COVER FILTER(A)ALIGN THE INDICATION MARKWITH LOCK POSITION.1) As shown, the fixed cap separates from the refrigerator by rotatingit counterclockwise.Remove the water filter from the box and put a month indicatorsticker on the filter as shown.2) If the water filter was installed in March, put on the "SEP" sticker.3) Remove the protective cap then position and insert thefilter as shown.4) Slowly turn the water filter clockwise 90º to alignthe indication mark on the cover, locking the filter in position. Do not overtighten.Please check that the indication line aligns with the lock position.Install the water filter.NOTE1) Slip the compression nut through and plastictube.2) Tighten the compression nut onto 1/4”comprression fitting(union).Connect the water line to the refrigerator.Water line must be connected to drinkable water onlyDo not overtighten the compressionnut.NOTEKeep the cap(A) in a safe place for recapping, whenyou will not use the filter.NOTENOTE3) Slip the compression ferrule and nut on cop-per (or plastic) tubing as shown.Tighten the comperssion nut onto the com-pression fitting(union).4) Turn water on and check for any leakege.Compression NutCompression fittingCompression NutFerrule