17MMeecchhaanniiccaall DDiissaasssseemmbbllyyEvaporator is located in the bottom of refrigerator.1. Take off the ductwork in refrigerator.2. Disconnect the wire connector.(Heater andThermistor)3. Desolder the capillary tube and the suction linefrom the evaporator.4. Remove the evaporator.5. With a file, score the capillary tube just upstreamof the soldered point. Break off the solderedsection to help prevent solder from plugging thetube during soldering.6. Place a new evaporator and braze the suctionand capillary tube to evaporator using silversolder.7. Install a replacement dryer.8. Evacuate and recharge the system usingreasonable procedures.The refrigerator thermistor is located inside of theupper light cover of the refrigerator.The CoolSelect ZoneTM thermistor is located outsidethe back of CoolSelect Zone TM drawer. Thetemperature signal goes to the micro-processor.Refrigerator ThermistorRefrigerator ThermistorCoolSelect ZoneTM ThermistorThermistorThermistorCoolSelect ZoneTM ThermistorSuction LineCapillary TubeThermal FuseEvaporator in Refrigerator