Samsung RS25H5121 Series User Manual

Also see for RS25H5111: Quick start guide User manual User manual User manual User manual

English - 10FlooringFor proper installation, you must place thisrefrigerator on a level, hard surface that is thesame height as the rest of the floor.This surface should be strong enough to support afully loaded refrigerator.To protect the finish of the flooring duringinstallation, cut a large section of the cardboardcarton and place it under the refrigerator whereyou are working.When moving the refrigerator, you need to pull andpush it straight forwards or back.Do not wiggle it from side to side.CAUTIONWhen installing, servicing or cleaning behind therefrigerator, be sure to pull the unit straight out andpush back in straight after finishing.Important: Make sure that you can easily moveyour refrigerator to its final location by measuringdoorways (both width and height), thresholds,ceilings, stairways, etc.The following chart details the exact height anddepth of this Samsung Side by Side Refrigerator.Dimensions [inch (mm)] ModelRS25H5121** RS25H5111**Width Only Cabinet 908 (35 3/4)With Leg Front 915.5 (36 1/20)DepthOnly Cabinet 784 (30 9/10)With Door 857.5 (33 3/4)With Handle 919 (36 1/5)90° Open F 1169 (46) / R 1295.5 (51)135° Open F 1017.5 (40 1/20) /R 1107 (43 3/5)HeightOnly Cabinet 1742.5 (68 3/5)With Hinge 1776 (69 9/10)With Door 1776 (69 9/10)• Allow clearance to the right, left, backand top when installing.This will help reduce power consumptionand keep your energy bills lower.• Make sure you disconnect the water supply lineBEFORE removing the freezer door.To avoid damage, refer to ‘Separating thewater line from the refrigerator’ in the manual(page 12).DA68-02981B-01.indb 10 2014. 1. 6. �� 1:50