English 29Setting upLeveling the refrigeratorMake sure the refrigerator is level so that you can make final adjustments.Use a level to test if the refrigerator is level both side to side and back to front.If the refrigerator is not level, you will not be able to get the doors perfectly even, whichmay cause moisture condensation and increased energy bills.NOTE• The front of the refrigerator is also adjustable.Before levelling the refrigerator, remove the front leg cover.Open both the freezer and refrigeratordoors.Unscrew the three screws holding the frontleg cover in place by turning them counter-clockwise.When the screws are loose, remove thefront leg cover.When the Freezer part is lower than the Fridge part.Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.When the Fridge part is lower than the Freezer part.LegLegScrew DriverInsert a flat-blade screwdriver into a sloton the Fridge Leg, then turn it clockwise.NOTE• Refer to the next section for the bestway to make very minor adjustments tothe doors.DA68-02981N-00.indb 29DA68-02981N-00.indb 29 2015. 3. 3. 9:342015. 3. 3. 9:34