Samsung RS265LA series Owner's Manual And Installation

Also see for RS265LA series: Owner's manual and installation Installation and use manual

Samsung RS265LA series Owner's Manual And Installation Manual pdf 27 page image

27INSTALLATION INSTRUCTIONSINSTALLATION OF THE WATER DISPENSER LINESEPARATIONOF RED CAPSTICKER(MONTH INDICATION)COVER FILTER(A)ALIGN THE INDICATION MARKWITH LOCK POSITION.1) As shown, the fixed cap separates from the refrigerator by rotatingit counterclockwise.Remove the water filter from the box and put a month indicatorstick on the filter as shown.2) If the water filter was installed in March, put on the "SEP" sticker.3) Remove the protective cap then position and insert thefilter as shown.4) Slowly turn the water filter clockwise 90º to alignthe indication mark on the cover, locking the filter inposition. Do not overtighten.Please check that the indication line aligns with the lock position.Install the water filter.NOTEKeep the cap(A) in a safe place for recapping, when youdon’t use the filter.NOTEConnect the water line to the refrigerator.Water line must be connected to drinkable water only.Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.Do not overtighten the compression nut.NOTENOTECompression Nut (1/4(Provided)Compression Fitting(Provided)Compression Nut (1/4(Purchased)Plastic Tubing(Purchased)Copper Tubing(Purchased)Ferrule(Purchased)Household Water LineRefrigerator1) Slip the compression nut through the providedplastic tubing.2) Tighten the compression nut onto 1/4”comprression fitting.3) Tighten the compression nut onto the com-pression fitting.4) Turn water on and check for any leakage.Using Copper Tubing- Slip the compression nut and ferrule oncopper tubing as shown.Using Plastic Tubing- Insert the molded end of the plastic tubinginto the compression fitting.