Samsung RS267LBSH Owner's Manual And Installation

Also see for RS263B Series: User manual Owner's manual & installation Owner's manual and installation Owner's manual and installation

Samsung RS267LBSH Owner's Manual And Installation Manual pdf 27 page image

27INSTALLATION INSTRUCTIONSINSTALLATION OF THE WATER DISPENSER LINECOVER FILTER(A)ALIGN THE INDICATION MARKWITH LOCK POSITION.1) Remove the fixed cap (A) as shown. the fixed cap separates fromthe Water Filter Compartment by rotating it counterclockwise.Remove the water filter from the box and put a month indicatorstick on the filter as shown.2) If the water filter was installed in March, put on the "SEP" sticker.3) Remove the Red protective cap from the filter, then position andinsert the filter as shown.4) Slowly turn the water filter clockwise 90º to alignthe indication mark on the cover, locking the filter inposition. Do not overtighten.Please check that the indication line aligns with the lock position.Install the water filter.NOTEConnect the water line to the refrigerator.Keep the cap(A) in a safe place for recapping, when youdon’t need to use the filter.NOTEWater line must be connected to drinkable water only.Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.Do not overtighten the compression nut.NOTENOTECompression Nut (1/4(Provided)Compression Fitting(Provided)Compression Nut (1/4(Purchased)Plastic Tubing(Purchased)Copper Tubing(Purchased)Ferrule(Purchased)Household Water LineRefrigerator1) Slip the compression nut through the providedplastic tubing.2) Tighten the compression nut onto the 1/4”compression fitting.3) Tighten the compression nut onto the com-pression fitting.4) Turn water on and check for any leakage.Using Copper Tubing- Slip the compression nut and ferrule oncopper tubing as shown.Using Plastic Tubing- Insert the molded end of the plastic tubinginto the compression fitting.SEPARATIONOF RED CAPSTICKER(MONTH INDICATION)