Samsung RS267TD series User Manual

Also see for RS265TD series: Quick start guide User manual User manual User manual User manual

4_ safety informationSEVERE WARNING SIGNS FOR INSTALLATION• Do not install the refrigerator in a damp place or place where it may come in contactwith water.- Deteriorated insulation of electrical parts may cause an electric shock or fire.• Do not install this appliance in a humid, oily or dusty location, in a location exposed todirect sunlight and water (rain drops).• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, roomheaters or other appliance.• Do not plug several appliances into the same multiple power board. The refrigeratorshould always be plugged into its own individual electrical board which has a voltagerating that matched the rating plate.- This provides the best performance and also prevents overloading house wiring circuits,which could cause a fire hazard from overheated wires.• If the wall socket is loose, do not insert the power plug.- There is a risk of electric shock or fire.• Do not use a cord that shows cracks or abrasion damage along its length or at either end.• Do not bend the power cord excessively or place heavy articles on it.• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly andpull straight out from the outlet.- Damage to the cord may cause short-circuit, fire and/or electric shock.• Do not use aerosols near the refrigerator.- Aerosols used near the refrigerator may cause an explosion or fire.• The water supply to this refrigerator must only be installed/connected by a suitablyqualified person and connect to a potable water supply only.• In order to operate the ice maker properly, water pressure of 20~125 psi is required.WARNINGsafety Information• The Refrigerator must be safely grounded- Always make sure that you have grounded the Refrigerator before attempting to investigateor repair any part of the appliance. Power leakages can cause severe electric shock.• This refrigerator must be properly installed and located in accordance with the manualbefore it is used.• Connect the power plug in proper position with the cord hanging down.- If you connect the power plug upside down, the wire can get cut off and cause a fire orelectric shock.• When moving the refrigerator, be careful not to roll over or damage the power cord.- This constitutes a fire hazard.• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.• Keep the packing materials out of reach of children.- There is a risk of death from suffocation if children put them on their head.• The appliance must be positioned so that the plug is accessible after installation.• You need to remove all the protective plastic film before you initially plug in to use theproduct.