16_ setting upMaKing MinoR aDjuStMEntS to thE DooRSRemember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review theprevious section on levelling the refrigerator.When the door of the freezer is higherthan the fridgeIn the case of the process to correct the imbalance is the same. Open the doors and adjust them,one at a time, as follows:1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .When you release the nut 1 , make sure that you use the hex wrench provided 3 to loosen thebolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut1 with your fingers.2. Adjust the height difference between the doors by turning the bolt 2 clockwise or counterclockwise .When you turn clockwise , the door will move up.3. After adjusting the doors, turn the nut 1 clockwise until it reaches the lower end of thebolt, then tighten the bolt again with the wrench 3 to fix the nut in place 1 .If you do not secure the nut firmly, the bolt may release.setting up your side-by-side refrigerator321WrenchboltNutAdjustment part321WrenchboltNut32Wrenchbolt