Samsung RS275 Series Owner's Manual And Installation

Also see for RS275: Owner's manual and installation Quick start guide Owner's manual Installation and use manual Installation and use manual

Samsung RS275 Series Owner's Manual And Installation Manual pdf 28 page image

28INSTALLATION OF THE WATER DISPENSER LINECOVER FILTER(A)ALIGN THE INDICATION MARKWITH LOCK POSITION.1) Remove the fixed cap (A) as shown. the fixed cap can be separatedfrom the Water Filter Compartment by rotating it counterclockwise.Remove the water filter from the box and put a month indicatorsticker on the filter as shown.2) If the water filter was installed in March, put on the "SEP" sticker.3) Remove the Red protective cap from the filter, then position andinsert the filter as shown.4) Slowly turn the water filter clockwise 90º to alignthe indication mark on the cover, locking the filter inposition. Do not overtighten.Please check that the indication line aligns with the lock position.Install the water filter.NOTEConnect the water line to the refrigerator.Secure the water line.Keep the cap(A) in a safe place for the future (to put itback in place when you don’t need to use the filter).NOTESEPARATIONOF RED CAPSTICKER(MONTH INDICATION)COMPRESSOR COVEROF REFRIGERATOR- Remove the compressor cover of the refrigerator.- Connect the water line to the valve, as shown in the figure.- When connected, check if there is any leakage.If any, re-seal the connection.- Reattach the compressor cover of the refrigerator.CONNECTION NUTWATER LINECLIP AWATER LINE- Using clip ”A”, fix the water line to the wall or the back of refrigerator.- When the water line is secure, make sure that thewater line is not excessively bent, pinched or squashed.Complete the installation of the water supply line.- Power on the refrigerator and press the lever on the right of the dispenser until waterruns out through the water line and all air has been cleared from the water line.- At this time, check for any possible leakages at the joints in the water line.After securing the water line, move the refrigerator to the required location.Once the refrigerator is in position, do not move it if possible..