Samsung RS54 Series User Servicing Manual

Also see for RS50 series: User manual

English - 6Drawer replacementHinge replacementCAUTIONCheck that the drawer is inserted properly into the rail during assembly.To replace the hinges, you must remove the doors first.CAUTION• When removing the doors, take extreme caution because the doors are heavy.• Before replacing the hinges, put a soft pad such as cardboard on the floor to prevent scratches onthe door when you place the doors down.• As the hinges must be handled carefully and replaced by two or more persons, we recommend youto call for professional technical service.• If you remove the hinge without holding the door, the door may fall and cause injury.• Ensure that the shaft is firmly tightened on the hinge.• Check that the hinge is firmly attached to the cabinet.• Make sure the wire connectors are connected properly.• Be careful not to damage the wires when fastening the top cover.WARNING• Tilting/laying the refrigerator requires a minimum of 2 people.• Disconnect the power cord before reversing the doors.To remove the drawer1. Pull out the drawer as far as it goes.2. Tilt the drawer up and pull it out until itis removed.To reattach the drawersReattaching the drawers follows the reverse order of their respective removal steps.Tools required (not provided)Philips screwdriver Flat-head screwdriver 11 mm spanner10 mm socket wrench 8 mm socket wrench 10 mm spanner