MaintenanceEnglish56MaintenanceSealing guard (applicable models only)To remove the sealing guardGently lift up the guard, and then pull it tothe front while holding the bottom side.To reinsert the sealing guard1. Put the guard on the front of thehousing. And then, insert the guard bylowering it.2. Press both hooks on the guard to lockthe guard. When the guard is lockedproperly, you will hear a clicking sound.CAUTION• Make sure the sealing guard is locked firmly. Otherwise, the guard may cause noisewhen you open or close the door.Untitled-30 56 7/17/2017 5:04:10 PM

Samsung RS62K Series User Manual

user manual

Safety information

Important safety symbols and precautions

Severe warning signs for transportation and site

Installation cautions

Usage cautions

Cleaning cautions

Critical disposal warnings

Additional tips for proper usage

Saving Energy Tips

Instructions about the WEEE

Installation

Step-by-step installation

Door removal for entrance

Operations

Temperature settings

Special features

Maintenance

Cleaning

Replacement

Troubleshooting

RS58K series

RS58K6307

RS58K6537

RS58K6588SL

RS58K6638

RS62K series