Samsung RSA1NHMH User Manual

Also see for RSA1D series: User manual User manual User manual Service manual User manual

setting up _1Remove any residual matter inside the filter. (Model with the filter)- Open the main water tap to check whetherwater is running through the water tube onthe water inlet side of the filter.- If water does not come out through the line,check whether the tap is open.- Leave the tap open until clean water isrunning out and any residual matter that builtup during manufacturing has been removed.Attach the filter lock stations.- Hold the filter lock stations in the appropriateposition (under the sink for example) and fix it tightlyinto place where to screw.Secure the filter in position.- Fix the filter in position, as shown in thefigure on the right.setting up your side-by-siderefrigerator01 sEtting uPselect the location where the filter is toinstall. (Model with the filter)- If you wish to reassemble the water inlet and out-let sides of the filter during filter installation,see the reference illustration.- Cut the water line attached to the filter to theappropriate place after measuring the distancebetween the filter and the cold water tap.COUPLERSIDE OFFILTERWATER INLETSIDE OF FILTERLINE OUTLET90 degreeFILTER WATER REFERENCEWATER LINEFILTERWATEROUTLET SIDEOF FILTERTWO FILTER LOCKSTATIONTWO FILTER LOCKSTATIONTIGHTENINGBANDFILTERWATER TUBEFILTERLOCKSTATIONS