uSinG thE DiGitaL DiSPLay“ freezer temp.” indicates the current freezer temperature.“ fridge temp.” indicates the current fridge temperature.When not in use the Display will turn off, this is normal.Power FreezeThis icon will light up when you activate the “Power freeze” feature. “Power freeze” is great for timeswhen you need a lot of ice. When you have enough, just press the button again to cancel the “Powerfreeze” mode.When you use this function the energy consumption of the refrigerator will increase. Rememberto turn it off when you don’t need it and return the freezer to your original temperature setting.Energy SaverThis icon will light up when you activate the “Energy Saver” function. The Energy Saver function isautomatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on thedoors, turn the Energy Saver function off.AlarmThis icon will be lit all the time. The door alarm will sound if any door is open for more than 2 minutes.The beeping stops when you close the door. If you need to turn off the Alarm function, press theLighting and Fridge buttons for 3 seconds at the same time.LightingThis icon will light up when you activate the “Lighting” feature. In this case, the dispenser light (underthe display) will be on constantly. If you would like the dispenser light to come on only when using thedispenser, turn the “Lighting” feature off by pressing the “Lighting” button..Power CoolThis icon will light up when you activate the “Power Cool” feature(refer to number 5, Fridge Button onPage 18 to select this function). For a quick fridge cool down, use “Power Cool”. If you select “PowerCool”, the inside temperature of the Fridge will decrease for about two and a half hours.Filter IndicatorWhen the filter indicator light changes to red, it is time to change the filter. Typically this happensabout every 6 months.The filter Indicator will be Blue when you initially insert the water filter.The filter Indicator will be purple when you have used your water filter for 5 months.The filter Indicator will be Red when you have used your water filter for 6 months.After removing the old water filter and installing a new one (see page 29 for instructions on how to dothis), reset the indicator status light by pressing the Ice off button for about 3 seconds.Cubed Ice , Crushed IceEnjoy cubed or crushed ice by selecting your preference from the digital control panel. The ice typelight indicates the type of ice that is currently chosen.WaterThis icon will light up when you activate the “Water” feature.operating _1902 oPERatinG