operating the SAMSUNG side-by-siderefrigeratorChanGinG thE intERioR LiGhtSPull the power plug out of the socket before changing the interior light of the refrigerator.- Otherwise, there is a risk of electric shock.If you experience difficulty when changing the light, contact your service center.Changing the LED Type LightingDo not disassemble or replace the LED type Lighting.To change the LED Type Lighting, contact a Samsung service center.ChanGinG thE watER fiLtERTo reduce risk of water damage to your property DO NOT use generic brands of water filersin your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTERS.SAMSUNG will not be legally responsible for any damage, including, but not limited toproperty damage caused by water leakage from use of a generic water filter.SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.The “Filter Indicator” light lets you know when it is time to change your water filter cartridge. To give youpreparation time to get a new filter, the red light will come on just before the capacity of the current filterruns out. Changing the filter on time provides you with the freshest, cleanest water from your fridge.1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.Place a sticker on the filter that dates six months in the future. For example, if you arereplacing the water filter in March, put the “SEP” (September) sticker on the filter to remindyou to replace in September. Normal filter life is about every 6 months.2. Remove the new filter’s protective cap and remove the old filter.3. Position and insert the new filter into the filter housing.Slowly turn the water filter clockwise to align with the printing mark on the cover, lockingthe filter in position. Make sure to align the water filter label mark with the center of coverfilter printing as illustrated. Remember, do not over-tighten.26_ operatingWARNINGWARNING1 2 3Turn until the labelaligned.Cover filterSticker(month indicator)CAUTION