WARNING1 Turn until thelabel aligned.Cover filterSticker(month indicator)02 oPEratingCAUTIONoperating the SAMSUNGside-by-side refrigeratorChanging thE intErior LightsPull the power plug out of the socket before changing the interior light of the refrigerator.- Otherwise, there is a risk of electric shock.If you experience difficulty when changing the light, contact your service center.Changing the LED Type LightingDo not disassemble or replace the LED type Lighting.To change the LED Type Lighting contact Samsung service center or your authorizedSamsung dealer.Changing thE watEr fiLtErThe “Filter Indicator” light lets you know when it is time to change your water filter cartridge.To give you preparation time to get a new filter, the red light will come on just before the capacityof the current filter runs out. Changing the filter on time provides you with the freshest, cleanestwater from your fridge.1. Remove the water filter from the box and put a month indicator sticker on the filter asshown.Place a sticker on the filter that dates six months in the future. For example, if you arereplacing the water filter in March, put the “SEP” (September) sticker on the filter toremind you to replace in September. Normal filter life is about every 6 months.2. Remove the new filter’s protective cap and remove the old filter.3. Position and insert the new filter into the filter housing.Slowly turn the water filter clockwise to align with the printing mark on the cover, lockingthe filter in position. Make sure to align the water filter label mark with the center of coverfilter printing as illustrated. Remember, do not over-tighten.operating _