_9setting up _901 SETTING UPsetting up your refrigeratorCongratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art featuresand efficiencies that this new appliance offers.First thing! Make sure that you can easily move your Refrigerator to its finallocation by measuring doorways (both width and height), thresholds, ceilings,stairways, etc.• Allow clearance to the right, left, back and top when installing. This will help reduce powerconsumption and keep your energy bills lower.• If you install the Refrigerator where is below 10ºC, it may not function in optimum level.When moving your refrigeratorTo prevent floor damage be sure the front leveling legsare in the up position(above the floor).Refer to ‘Leveling the refrigerator’ in the manual(on page 17)Screwdriver(-) Control LeverFLOORINGFor proper installation, this refrigerator must be placed on alevel surface of hard material that is the same height as therest of the flooring. This surface should be strong enough tosupport a fully loaded refrigerator, or approximately 106kg.To protect the finish of the flooring, cut a large section of thecardboard carton and place under the refrigerator where youare working. When moving the refrigerator, be sure to pull itstraight out and return it to position by pushing it straight in.CAUTIONGETTING READY TO INSTALL THE REFRIGERATORSelecting the best location for the Refrigerator• A location with easy access to the water supply.• A location without direct exposure to sunlight.• A location with level (or nearly level) flooring.• A location with enough space for the Refrigerator doors to openeasily.• Allow sufficient space for air circulation of the internal cooling system.If the Refrigerator does not have enough space, the internal coolingsystem may not work properly.150mm100mm100mm1368.5mm817mm1249.0mm1504.0mm