12_ setting upAttach the Adjustable Leg Cover using a Phillips4.(+) Screwdriver.How to Assemble Fridge DoorAttach the detached Fridge Door to the Mid1.Hinge.Slide the Fridge Hinge (C) into the fi xing slot,2.and then press it down so that it is aligned withthe hole in the door.Inserting the Fixer Lever (B) in the direction of3.the arrow, and then fl ip it down to assemble.Assemble the Wire Connector.4.CCBBBBConnect the Water Tube [E]. If the model has5.red clips, attach them now to the Coupler [F].Connect the connector [G] on the left door andthe connector [H] on the right door.Red ClipRed Clip(6.35mm)(6.35mm)GGEEHHFFAttach the front of the Top Cover, and then6.press down on its back until it lies fl at. Re-attach the screws.• Assemble the Fridge and Freezer doorsin the reverse order of disassembly.If the Wire Connectors are cross-•assembled, the display will not workproperly.Clips are located inside the cap on the•top.To prevent water leaks, if the refrigerator•uses red clips, make sure the red clipsare properly connected to the Couplerafter you insert the Water Tube [E] intothe center of the Coupler.Center of theCenter of theIndicator LineIndicator Lineclip Aclip A(6.35 mm)(6.35 mm)EECAUTION