English - 18When installing, servicing, or cleaningbehind the refrigerator, be sure to pull theunit straight out and push back in straightafter finishing.Also, make sure your floor supports the full-load refrigerator.Otherwise, it may cause floor damage.Please tie up the extra length of the powercord at the back of the refrigerator so asnot to be touched on the floor preventingthe power cord from being crushed by therollers upon relocation.FLOORINGFor proper installation, this refrigerator must beplaced on a level surface of hard material that hasthe same height as the rest of the flooring.This surface should be strong enough to support afully loaded refrigerator.To protect the floor finish, cut a large section of thecardboard carton and place it under the refrigeratorwhere you are working.Pulling or pushing the refrigerator maydamage the floor.Moving the refrigerator after installation maydamage the floor.CAUTIONCAUTIONLEVELLING THE REFRIGERATORTo avoid a hazard due toinstability of the refrigerator,please place the refrigeratoron a horizontal support andlevelled in accordance withthe following instruction forinstallation.Failing to do so may result inthe refrigerator tipping and apersonal injury.If the front of the appliance isslightly higher than the rear,the door can be opened andclosed more easily.< Case2 >< Case1 >DA68-02960A (EN)-02.indd 18 14. 1. 8. �� 3:42