100Specifications1010 Specifications10.7 Standard Signal Mode Tablez This product can be set to only one resolution for each screen size to obtain the optimum picturequality due to the nature of the panel. Therefore, a resolution other than the specified resolutionmay degrade the picture quality. To avoid this, it is recommended that you select the optimumresolution specified for the screen size of your product.z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDTmonitor before you exchange it with the LCD monitor.If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen willautomatically be adjusted. If the signal transmitted from the PC does not belong to the standard signalmodes, the screen may be blank even though the power LED turns on. In such a case, change thesettings according to the following table by referring to the graphics card user manual.Model NameS19D300HY /S19D340HY /S19D300NYS20D300BY /S20D300H /S20D340H /S20D300HY /S20D340HYS22D300BY /S22D300HY /S22D340HY /S22D300NY /S24D300BL /S24D300HL /S24D340HL /S24D300H /S24D340HSynchronization HorizontalFrequency30 ~ 81 kHzVerticalFrequency56 ~ 75 HzResolution OptimumResolution1366 x 768 @ 60 Hz 1600 x 900 @ 60 Hz 1920 x 1080 @ 60 HzMaximumResolution1366 x 768 @ 60 Hz 1600 x 900 @ 60 Hz 1920 x 1080 @ 60 Hz
