Samsung S24AG300NE User Manual

Also see for S24AG30 Series: User manual

Troubleshooting GuideChapter 06Requirements Before Contacting SamsungCustomer Service Centre― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists,contact Samsung Customer Service Centre.Product diagnosis (Screen issue)If a problem occurs with the monitor screen, run Self Diagnosis to check that the monitor is workingproperly.Checking the Resolution and FrequencyIf a resolution that is not supported (see the Standard Signal Mode Table) is selected, the Not OptimumMode message may appear for a short time or the screen may not be displayed properly.― The displayed resolution may vary, depending on the PC system settings and cables.Check the following.Installation issue (PC mode)The screen keeps switching on and off.Check the cable connection between the product and PC, and ensure the connectors are locked.Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected tothe product and PC.The blank spaces found on the screen have nothing to do with the product.Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust thescreen size in the HDMI or DVI settings for the graphics card.If the graphics card settings menu does not have an option to adjust the screen size, update thegraphics card driver to the latest version.(Please contact the graphics card or PC manufacturer for further details about how to adjust the screensettings.)Screen issueThe power LED is off. The screen will not switch on.Check that the power cable is connected properly.If a problem occurs with the monitor screen, run Self Diagnosis to check that the monitor is workingproperly.29