23Preparations11 Preparations1.3 Installation1.3.1 Attaching the StandBefore assembling the product, place the product down on a flat and stable surface so that the screenis facing downwards.Insert the stand neck into thestand base in the directionshown in the figure.Check that the stand neck isfirmly connected.Tightly fasten the connectingscrew at the bottom of the standbase.Place a soft cloth over the tableto protect the product and placethe product onto the cloth sothat the front of the product isfacing downwards.Put the headphone holder in theplace shown by figure.Turn the connecting screws fullyso that it is completely fixed.
