Samsung S24C330GAE User Manual

12Wall Mount Kit Specifications (VESA)― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount tosurfaces other than plaster board, please contact your nearest dealer for additional information. If youinstall the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mountkits contain a detailed installation manual and all parts necessary for assembly are provided.• Do not use screws that are longer than the standard length or do not comply with the VESAstandard screw specifications. Screws that are too long may cause damage to the inside of theproduct.• For wall mounts that do not comply with the VESA standard screw specifications, the length ofthe screws may differ depending on the wall mount specifications.• Do not fasten the screws too firmly. This may damage the product or cause the product to fall,leading to personal injury. Samsung is not liable for these kinds of accidents.• Samsung is not liable for product damage or personal injury when a non-VESA or non-specifiedwall mount is used or the consumer fails to follow the product installation instructions.• Do not mount the product at more than a 15 degree tilt.• Standard dimensions for wall mount kits are shown in the table below.• This apparatus is intended to be supported by UL listed Wall Mount Bracket.• Only supports horizontal orientation, does not support left and right rotationCProductWall mount bracketModel name VESA screw hole specs(A * B) in millimetersC Standard Screw Quantity― Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due toelectric shock.S24C33"S27C33"75.0 x 75.0 12.0 mm1.2 cm4.0 mmΦ,0.7 pitch*12.0 mmlength4