Samsung S24D332HS User Manual

20SAMSUNG MAGIC AngleSAMSUNGMAGICAngle allows you to configure the settings to obtain the optimum picture quality according toyour viewing angle.― This menu is not available when SAMSUNGMAGICBright is set to Cinema or Dynamic Contrast mode.― This menu is not available when Game Mode is enabled.You can customize the angle to suit your preferences.• Off 1 : Select this option to view directly in front of the product.• Lean Back Mode 1 2 : Select this option to view from a place slightly lower than the product.• Lean Back Mode 2 3 : Select this option to view from a place lower than Lean Back Mode 1.• Standing Mode 4 : Select this option to view from a place higher than the product.• Side Mode 5 : Select this option to view from either side of the product.• Group View: Select this option for more than one viewer to view from places 1 , 4 , and 5 .• Custom: Lean Back Mode 1 will be applied by default if Custom is selected.SAMSUNG MAGIC UpscaleSAMSUNGMAGICUpscale function can enhance the layers of the picture details and the vividness of the picture.The function has more obvious effects on low-resolution pictures.― This menu is not available when SAMSUNGMAGICBright is set to Cinema or Dynamic Contrast mode.― This menu is not available when Game Mode is enabled.• Off / Mode1 / Mode2― Comparing with Mode1, Mode2 has a stronger effect.Image SizeChange the picture size.In PC mode• Auto: Display the picture according to the aspect ratio of the input source.• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.In AV mode• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.• 16:9: Display the picture with an aspect ratio of 16:9.• Screen Fit: Display the picture with the original aspect ratio without cutting off.― The function may not be supported depending on the ports provided with the product.― Changing the screen size is available when the following conditions are satisfied.― A digital output device is connected using the HDMI cable.― The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model cansupport all of these signals.).― This can only be set when the external input is connected through HDMI and PC/AV Mode is set to AV.