White balance[] Using the Custom White BalanceWhite balance settings may vary slightly depending on the shootingenvironment. You can select the most appropriate white balance set-ting for a given shooting environment by setting up the custom whitebalance.1. Select the CUSTOM ( _m_ ) menu ofthe White Balance and place a sheetof white paper in front of the camera sothat the LCD monitor shows only white.2. MENU/OK button : selects previous Whitepapercustom white balance.Shutter button : saves new custom white balance.- The custom white balance value will be applied, starting with thenext picture you take.- The user configured white balance will be remain effective until it isoverwritten.Exposure compensationThis camera automatically adjusts the exposure according to the ambi-ent lighting conditions.You can also select the exposure value by using the Fn button.[] Compensating Exposure1. Press the Fn button, and then use the UPand DOWN buttons to select the exposurecompensation icon ( [_ ).2. Use the LEFT and RIGHT buttons to set thedesired exposure compensation factor.3. Press the OK or Fn button.The value you set will be saved and theExposure Compensation setup mode will be closed. If you changethe exposure value, the exposure indicator ( [_ ) wilt be displayedon the bottom of the LCD monitor.A negative exposure compensation value reduces the exposure.Note that a positive exposure compensation value increases theexposure and the LCD monitor will appear white or you may not getgood pictures.RECOROING (37}