052Command LeverYou can enable the desired features forthe command lever on the back of thecamera.- [Command Lever] Sub menus:[EV], [EV(A, S)], [ISO], [WB]- Move the command lever to the leftor right to select the submenu for eachfeature.Ú For detailed information on using the command lever, refer to Page 31.z The [Command Lever] feature is enabled in [Program], [Manual],[DUAL IS], or [Movie] mode.z Selectable sub-menu and default value can vary depending onrecording mode.Flash IntensityYou can control flash intensity.(You can set flash intensity within therange of +/- 1EV in intervals of 0.5EV.)- [Flash EVC] Sub menus:[+1.0], [+0.5], [0], [-0.5], [-1.0]z In [Auto], [DUAL IS], [Beauty Shot], [Smart Auto], [Scene], or[Movie] mode, the [Flash EVC] feature is disabled.z If the subject is too close or the sensitivity is too high, changingthe value to a negative value (-) may not have any effect.z If the flash intensity is out of the control range because theexposure value is too high or low, the camera may not operateproperly.RECORDINGCommand LeverFlash EVCQualityACBOISVoice MemoBack SetOK+1.0+0.50-0.5-1.0RECORDINGCommand LeverFlash EVCQualityACBOISVoice MemoBack SetEVISOWB2008/12/01 PM 01:002008/12/01 PM 01:0011
