Samsung SBB-SS08E User Manual

Also see for SBB-SS08E: Quick setup guide User manual

Contents

28Connection Using an HDMI-DVI Cable― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. Toresolve this, additionally connect an audio cable to the audio ports on the product and video device.― After connecting a video device to the product with an HDMI-DVI cable, make sure to configure thesettings as shown below to enable the video and audio from the video device.― System → set HDMI Sound to AV(HDMI)― Picture → set each screen mode to Video/Image under Picture Mode― System → General → set HDMI Hot Plug to On― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.HDMI IN 1 , HDMI IN 2AUDIO INConnection Using an HDMI CableUsing an HDMI cable or HDMI to DVI Cable (up to 1080p)• For better picture and audio quality, connect to a digital device using an HDMI cable.• An HDMI cable supports digital video and audio signals, and does not require an audio cable.- To connect the product to a digital device that does not support HDMI output, use anHDMI-DVI and audio cables.• The picture may not display normally (if at all) or the audio may not work if an external device thatuses an older version of HDMI mode is connected to the product. If such a problem occurs, ask themanufacturer of the external device about the HDMI version and, if out of date, request an upgrade.• Be sure to use an HDMI cable with a thickness of 14 mm or less.• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connectionerror may occur.• A basic high-speed HDMI cable or one with ethernet is recommended.This product does not support the ethernet function via HDMI.HDMI IN 1 , HDMI IN 2