Samsung SBB-SSN User Manual

Also see for SBB-SSN: Connection manual Quick setup guide

Contents

51Network Settings (Wireless)Connecting to a Wireless NetworkThe LAN Port on the WallLAN CableWireless IP sharer(router having DHCP server)Samsung recommends using IEEE 802.11n. When you play video over a network connection, thevideo may not play smoothly." Select a channel for the wireless IP sharer that is not currently being used. If the channel setfor the wireless IP sharer is currently being used by another device nearby, this will result ininterference and communication failure." Your product supports only the following wireless network security protocols.If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type isset to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung productswill not support a connection in compliance with new Wi-Fi certification specifications." If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to thenetwork via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPSwill automatically configure the SSID and WPA key in either mode." Connection Methods: You can setup the wireless network connection in three ways.Auto Setup (Using the Auto Network Search function), Manual Setup, Use WPSAutomatic Network Setup (Wireless)Most wireless networks have an optional security system that requires devices that access thenetwork to transmit an encrypted security code called an Access or Security Key. The SecurityKey is based on a Pass Phrase, typically a word or a series of letters and numbers of a specifiedlength you were asked to enter when you set up security for your wireless network. If you usethis method of setting up the network connection, and have a Security Key for your wirelessnetwork, you will have to enter the Pass Phrase during the the automatic or manual setupprocess.How to set up automatically1 Set Network Type to Wireless from the Open Network Settings page.2 The Network function searches for available wireless networks. When done, it displays a listof the available networks.In the list of networks, press the ▲ or ▼ button to select a network, and then press the Ebutton twice." If the desired wireless router does not appear, select Refresh to search again." If the router cannot be found after retrying, select the Stop button.The Add Network button appears.3 If the Enter the password for (AP Name). screen appears, go to step 4. If you select awireless router that does not have security, go to step 6.4 If the router has security, enter the Enter the password for (AP Name). (Security key or PIN).5 When done, use the right arrow button to move the cursor to Done, and then press E. Thenetwork connection screen appears and the verification process starts." A connection with the router is established, but the Internet cannot be accessed.6 When the connection has been verified, the “Success! Your device is connected to theInternet. If you have any problems using online services, please contact your Internetservice provider.” message appears.