|
ENGLISH4444✤ The WindCut Plus function works in both and (Audio dubbing) modes. ➥page 19✤ Use the WindCut Plus when recording in windy places such as thebeach or near buildings.✤ The WindCut Plus function minimizes wind or other noises whilerecording.- When the WindCut Plus is on, some lowpitched tones are eliminated along with thesound of the wind.1. Set the [Power] switch to [CAMERA] or [PLAYER].2. Set the [Mode] switch to [TAPE].(SC-D375(H)/D975 only)3. Press the [MENU] button.4. Press the […… / ††] button to select ,then press the [OK] button.5. Press the […… / ††] button to select Plus>, then press the [OK] button.6. To activate the WindCut Plus function, press the[…… / ††] button to select or thenpress the [OK] button. : Removes the low pitched wind noise. : Minimizes the wind noise whilepreserving voices.7. To exit, press the [MENU] button. WindCut Plus ( or )icon is displayed.[ Notes ] Make sure WindCut Plus is set to off when you wantthe microphone to be as sensitive as possible. WindCut Plus function is not available in USBStreaming mode. (SC-D375(H)/D975 only)Advanced RecordingCutting Off Wind Noise (WindCut Plus)Move Select ExitMENUOKCamera Mode√RecordRec ModeAudio ModeWindCut PlusReal Stereo√SP√12Bit√Off√OffMove Select ExitMENUOKOffOnAuto4660min0:00:10SPSTBY7œCamera ModeBackRec ModeAudio ModeWindCut PlusReal Stereo1166::99 WWiiddee✤ ( ) ( )➥ 19✤✤-1. [CAMERA] [PLAYER]2. [TAPE]SC-D375(H)/D975)3. [MENU]4. / )[OK]5. / , [OK]6. / ( ([OK] ( : ( :7. [MENU] ( ( )[ ] USBSC-D375(H)/D975)( ) PreviousNext |