I ENGLmSH IAdvanced Recording÷ The DIS function works only in mode. _page 19+ DIS (Digital Image Stabilizer) is a function that compensates for any shaking or handmovement while holding the Camcorder (within reasonable limits).+ It provides more stable pictures when:Recording with the zoom (Digital Zoom is not available in the DIS mode.)Recording a small object close-upRecording and walking at the same timeRecording through the window of a vehicle1. Set the [Power] switch to [CAMERA].2. Set the [Mode] switch to [TAPE]. (SC-D375(H)/D975 only)3. Press the [MENU] button.[] The menu list will appear.4. Press the [A / T] button to select , then press the [OK] button.5. Press the [A / _'] button to select , then press the [OK] button.6. To activate the DIS function, press the [A / T] button to select , then press the[OK] button.[] If you do not want to use the DIS function, set the menu to .7. To exit, press the [MENU] button.[] DIS (1__) icon is displayed.[ Notes ][] You can directly access the DIS function using the [Q.MENU] button, w,,page 20[] Digital Zoom, COLOR NITE, Mosaic, Mirror, Emboss2 or Pastel2 is not available in theDIS mode.[] DIS function in 16:9 Wide mode may produce lower quality than in normal mode.(SC-D372/D375(H)/D975 only)[] When you press the [PHOTO] button while the DIS function is enabled, the DIS will bereleased shortly and resume automatically after the still image recording.[] It is recommended that you deactivate the DIS function when using a tripod.[] If you use the DIS function, the picture quality may deteriorate.[] EASY.Q mode automatically sets the to .[] 16:9 Wide mode is not available in DIS mode. (SC-D371 only)[] Once DIS is set, 16:9 Wide mode will be released. (SC-D371 only)f \ /°Camera Modei,\_Move _ Select _Exit_7_ i/-_,,osTBy [] O0016_m_n_i j
