Selecting Energy Saving ModeIf you wish to save energy when using your air conditioner, select theEnergy saving mode with the Energy Saving button.3 Press the button.Result: ◆ The indoor unit beeps.◆ The air conditioner runs in the Energy saving mode.◆ The outer air flow blade moves up and down.◆ To stop the Energy saving mode, press the again.4 To adjust the temperature, press the button one or more timesuntil the required temperature is displayed. Possible temperatures arebetween 26°C and 30°C inclusive.NNNN oooo tttt eeee If you want to adjust temperature under 26°C, cancel theEnergy saving mode before adjusting the temperature.6 To control the direction of the air flow, refer to page 15.5 To select the fan speed, press the button one or more times untilthe required setting is displayed.E-141 If necessary, press the (On/Off) button.Result: ◆ The operation indicator on the indoor unit lights up.◆ The air conditioner starts up in the mode selectedwhen the unit was last used.◆ The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being:◆ Plugged in◆ Stoppedlt will start up normally after three minutes.IMPORTANT2 Select COOL mode by pressing the button.NNNN oooo tttt eeee You can select the Energy saving mode only in COOL mode.