22_ TroubleshootingTroubleshootingPROBLEM SOLUTIONMotor does not start. • Check cable, pulg and socket.• Leave to cool.Suction force isgradually decreasing.• Check for blockage and remove.• Please unclog the intake.In operation, thevacuum cleaner stopsafter repeating runsand stops three times.Cord does not rewindfully. • Pull the cord out 2-3 m and push down the cord rewind button.Vacuum cleaner dowsnot pick up dirt. • Check hose and replace if required.Low or decreasingsuction.• Please check filter and, if required, clean as illustrated in theinstructions. if filters are out of condition change them to newones.Body overheating. • Please check filters, if required clean as illustrated in theinstruction.Static electicitydischarge.• Please decrease power suction.• This can also occur when air in the room is very dry.Please ventilate the room till air humidity becomes normal.The vacuum cleanermakes a strangenoise.• In order to protect the motor in the cleanr, it rotates slowly whenyou just turn on the cleaner.(Before the motor stabilizes,) this causes the loud noise at theinitial state and it is not failure in the machine.This vacuum cleaner is approved by the following:Electromagnetic Compatibility Directive : 2004/108/EECLow Voltage Directive : 2006/95/EC