Samsung SC12F50 series User Manual

Also see for SC12F50 series: User manual User manual

10_ operating the cleanerPOWER BRUSH (SC12F50P SERIES)Vacuuming with the power brush1. Attaching the power brushThe hose must be plugged into the canister and the powerbrush must be plugged into the hose and extension wand.2. Vacuuming• For best results, move the power brush slowly using short,overlapping strokes.• For heavily soiled areas, repeat strokes in several directions.CAUTION Do not invert the power brush while it is running.3. Checking the Performance of the power brushYou can check whether the power brush is operating correctly by lifting up the extension tubeslightly to view the back of the brush.The power brush will not operate when it is jammed or the unit is turned off.If the power brush is jammed, unplug the power cord from the electrical outlet.Turn the power brush over and remove the jammed object.Turn the power brush back to the vacuuming position and resume vacuuming.Overload protectorThe overload protector shuts off the brush motor if thefloor brush becomes obstructed. The floor brush willstop, but the suction motor will continue to run. To resetthe overload protector, turn the vacuum off and unplugit. Clear the obstruction from the floor brush area. Usea pen tip to press down the reset switch. Turn thevacuum on and continue cleaning.Reset S/Woperating the cleaner