Samsung SC12F70 Series User Manual

Operating cleaner _1303 OPERATING CLEANERPOWER BRUSH (SC12F70P Series)Vacuuming with the power brush1. Attaching the power brush• The hose must be plugged into thecanister and the power brush must beplugged into the hose and extensionwand.2. Vacuuming• For best results, move the power brushslowly using short, overlapping strokes.• For heavily soiled areas, repeat strokes inseveral directions.CAUTION Do not invert the power brush while it is running.3. Checking the performance of the power brushYou can check whether the power brush is operating correctly by lifting up theextension tube slightly to view the back of the brush.The power brush will not operate when it is jammed or the unit is turned off.If the power brush is jammed, unplug the power cord from the electrical outlet.Turn the power brush over and remove the jammed object.Turn the power brush back to the vacuuming position and resume vacuuming.Overload protectorThe overload protector shuts off the brushmotor if the floor brush becomes obstructed.The floor brush will stop, but the suctionmotor will continue to run. To reset theoverload protector, turn the vacuum off andunplug it. Clear the obstruction from the floorbrush area. Use a pen tip to press downthe reset switch. Turn the vacuum on andcontinue cleaning.