Selecting the Cool ModeYou can select the Cool mode if you want to cool your room.You can adjust the temperature and the fan speed when cooling.E-101 If necessary, press the button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.To control the airflow direction, refer to page 15.5Press the button on the remote control until is displayed.Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Cool mode.2You can change modes at any time.NNNN oooo tttt eeeePress the button to adjust the temperature until the requiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result: Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps If the room temperature is higher than the selectedtemperature, the air conditioner starts cooling. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan operates consistently.3Press the button to select the fan speed until the required settingis displayed.Automatic (rotated : )LowMediumHighMaximumResult: Each time you press the button, the indoor unitbeeps.4