Alignment and adjustmentSamsung Electronics 5-275-3-3 VCR Section0. EMPHAEPR:XX EVR:XXNote 3 : 1. Video block - See page 5-30 for the location of tests points and adjustments.Audio block - See page 5-31 for the location of tests points and adjustments.2. Press the “BLC” button of set for mode change.Note 4 : The OSD information.“XX” means arbitary values. It can be different number depend on the condition.Test pointStep Adjustment Item1. Mode and input signal/alignment tape2. Test point and ADJ. part3. Result and RemarksADJ. pointNote 1 : From now on, the structure of every adjustment is as follows.Note 2 : How to connect video in/out signal- Connect the video cable to pattern generator and ass’y A/V Jack, so that video in/out signal is adjustedautomatically.Fig. 2 Video Signal Connection

Samsung SCA20 Service Manual