Samsung SCC-C4207P Owner's Instructions Manual

Also see for SCC-C4207: Owner's instructions Owner's instructions

E109✔ In Setup Menu Mode- UP/ DOWN buttons: Use to move the cursor up or down.- LEFT/ RIGHT buttons: Use to move the cursor left orright, or to sequentially view the values that can beassigned to a parameter.- ENTER button: Use to select a Sub Menu item, and toaccept the current value.ZOOM/ FOCUS REMOTE terminalsThis port is used for ZOOM/FOCUS, MENU CONTROL,HOME RETURN, and AF by using an external controller.Depending on the input condition, 4 modes, A, B, C, andD are available. (SPECIAL - CTRL TYPE)(Operation Voltage Range : +3V~+13V, -3V~-13V)1) When the voltage is supplied to either ZOOM or FOCUS port,❖ 1: During MENU OFF, controls ZOOM/FOCUS andduring MENU ON, changes the direction, Up, Down,Left, and Right.2) When the voltage is supplied to both ports❖ 2: For short voltage supply during MENU OFF,executes AF and for more than 2 second❖ 3: For more than 2 second long voltage supply, movesto the PRESET 0(HOME) position.DAY/NIGHT External Signal Input & Alarm SignalOutputThis is a function to receive the external DAY/NIGHTsignal from the sensor(option) and convert the signal intoBW. An alarm signal is output from this terminal when theMOTION DET mode is activated or BW mode is activated.Connect an external sensor to the DAY/NIGHT terminalas shown in ➀ then connect any external device such asa buzzer or lamp to the ALARM terminal as shown in ➁.The ALARM output terminal is an open collector with thefollowing capacity: DC 16V and 100mA.OFF : Open contactON : Below 100mAThe DAY/NIGHT input terminal has the input of DC 5Vpull-up and over 0.2mA.OFF : Open contactON : Closed contactVIDEO OUT terminalConnect the monitor's VIDEO IN. The video signal fromthe camera is transmitted to the monitor via this terminal.RS485 terminalRS485 remote control terminal.Power LEDLights when power is on.POWER IN terminalPlug in the power adapter here.Function❖ 1ABCDTELE(Up)-6V-6V+6V+6VZOOM Port FOCUS PortWIDE(Down)+6V+6V-6V-6VNEAR(Left)-6V+6V-6V+6VFAR(Right)+6V-6V+6V-6VCodeFunctionABCD-6V-6V+6V+6VZOOM Port FOCUS PortENTER/AF ❖ 2 HOME RETURN ❖ 3ZOOM Port FOCUS Port-6V+6V-6V+6V+6V+6V-6V-6V+6V-6V+6V-6VCodeDAY/NIGHT INALARM OUTGND12