251. With the battery in position in the phone, attach the cord from the traveladaptor by plugging it into the adaptor outlet at the bottom of the phone.2. Connect the adaptor to a standard 110/220 free volt AC wall outlet. Thebattery will begin charging immediately, and the LED (located at the topof your phone) will light and remain red while the battery icon animates,the icon will remain animated, even if the phone is turned off duringcharging.3. The LED indicates the status of the battery being charged.•Red indicates that the battery is charging.•Green indicates that the battery is fully charged.•Yellow indicates (1) the battery is not seated correctly in thephone, (2) the adaptor is not plugged in correctly, or (3) thebattery is inoperable. Please check the adaptor and/or battery.4. You can make a phone call when the phone is plugged into the traveladaptor. The adaptor will continue to charge the battery even when youare making the call.Note: The battery charges faster when the phone is turned off.Low battery indicatorYou can tell whether or not your battery needs to be recharged by checking thebattery indicator (this icon is located in the upper-right corner of thedisplay screen). The presence of all three bars indicate a full charge. No bars(the battery icon is empty) means your battery must be charged.The empty battery iconTwo to three minutes before the battery charge level gets too low to operate thephone, the battery sensor will let you know by blinking an empty battery icon( ), and sounding a tone. If you continue to operate the phone withoutcharging the battery, the phone will automatically turn off. If this happens, yourwireless call will be terminated. However, if you plug into a charging device,
