Samsung SCH-A310 Service Manual

Also see for SCH-A310 Series: User guide User guide User guide

SAMSUNG Proprietary-Contents may change without notice4-14. NAM Programming4-1 NAM programmingProgramming of all NAM parameters, e.g. Service Security Code, MCC, MNC, MIN#, CDMA Channel#,vocoder rate, MOB_TERM, SID, SID/NID pairs, Slot Cycle Index, etc.1) Press “Menu 6, ∗” Enter SPC Code “000000” Use Right navigation key to select items to program.2) You can select MORE (Menu) when “Basic NAM 1 programming is complete.” displays. Select if you wantto program more detailed items than shown in basic NAM programming. Press OK to save or Rightnavigation key to proceed to next item.-> MORE programming not a required for NAM programming.3) To toggle between settings, e.g. Home SID/NID pairs or selecting between Yes/No, use the Up/Downnavigation key:A. For changing Home SID/NID pairs, select from SID/NID pair numbers 01 to 20 by pressing Upnavigation key Press [edit] by pressing Menu key to change setting Press OK key to save setting.B. For changing Forn SID or NID Registration, Home Sys. Registration, etc. press Up/Down navigationkey to select between Yes or No. Press OK key to save setting.4) Press End Key to save & exit NAM programming.4-2 Field Debug Screen and Test Calls1) Press “Menu 0, ∗” Enter “000000” ;1 ; Debug Screen2 : Test Calls:Markov New 8K, Markov New 13K, Loop Back 8K, Loopback 13K,TDSO Call Simple, TDSO Full2) Repeat above 1) to exit Debug screen4-3 A-Key programming via Keypad1) Press “Menu 6, ∗” Enter SPC Code “000000” Menu (Soft key) - then you will see “Press[AKEY] to continueAKEY: “ Menu ([AKEY] ) Enter the 20-digit AKEY. Press “OK” Key to save value.