Section 8108Change LockThe default lock code is the last four digits of your phonenumber. Change Lock allows you to change this code to alock code of your preference.1. In standby mode, press the Menu, use the rightnavigation key to highlight Settings & Tools. PressSystem. The System sub menus listed in thedisplay. Press Security.You’re prompted to enter the lock code. The default lockcode is the last four digits of your telephone number.2. Press Edit Code. Two options are available Deviceand Location. Use the navigation keys to highlight yourchoice and press .3. At the “Enter New Lock Code” prompt, enter the newlock code. You’re prompted to confirm the new lockcode.4. “Device or Location Lock Code Changed” messageappears in the display confirming that your lock code hasbeen changed.Note: Your phone does not allow you to view the lock code for obvioussecurity reasons. If you change the lock code, be sure to write down ormemorize the new code.Emergency #Note: Emergency number 911 is hard-coded into your phone. You can dialthis number any time, even when the phone is locked or restricted. If youcall 911 an audible tone is heard and an emergency prompt appears in thedisplay for the duration of the call.
